The ’87 Monte Carlo SS is a classic car that is often sought after by car enthusiasts. The car is known for its sleek design and powerful engine. One question that often comes up when discussing this car is what kind of heads it has.

There are a few different options when it comes to the heads on the ’87 Monte Carlo SS. One option is the factory heads, which are known for their performance and reliability. Another option is aftermarket heads, which offer a variety of features and options.

The factory heads are a good option for those who are looking for a reliable and performance-driven head. The heads offer a variety of features, including large valves and ports. They are also made from high-quality materials, which ensures that they will last for a long time.

The aftermarket heads are a good option for those who are looking for more options and features. The heads come with a variety of different options, including port size and shape. They are also made from high-quality materials, which ensures that they will last for a long time.

Ultimately, the decision of what heads to use on the ’87 Monte Carlo SS is up to the individual. The factory heads are a good option for those who are looking for a reliable and performance-driven head. The aftermarket heads are a good option for those who are looking for more options and features.

How do I know what Cylinder Heads to buy?

There are a few factors you need to consider when purchasing cylinder heads. The most important factor is the engine size. You also need to determine the type of engine, the make and model of the car, and the year the car was manufactured.

You can find cylinder heads for sale at various online retailers. Before you purchase cylinder heads, you need to determine the engine size. The engine size is typically stamped on the top of the engine. The engine size will also be listed in the car’s owner’s manual.

You also need to determine the type of engine. There are two types of engines: inline and V-type. Inline engines are more common and are found in most cars manufactured after the early 1990s. V-type engines are less common and are typically found in luxury cars and sports cars.

You also need to determine the make and model of the car. The make and model of the car will be listed in the car’s owner’s manual. You can also find this information online.

Finally, you need to determine the year the car was manufactured. The year the car was manufactured will be listed on the car’s registration card or on the car’s title.

Once you have determined the engine size, the type of engine, the make and model of the car, and the year the car was manufactured, you can begin to research cylinder heads that are compatible with your car.

You can find cylinder heads for sale at various online retailers. When shopping for cylinder heads, it is important to compare the prices and features of various products. You should also read the reviews of previous customers to get an idea of the quality of the product.

When purchasing cylinder heads, it is important to ensure that the product is compatible with your car. Many retailers will list the compatibility of the cylinder head on the product page. If the retailer does not list the compatibility, you can contact the retailer’s customer service department for assistance.

It is also important to ensure that the cylinder heads you purchase are compatible with the type of engine in your car. Cylinder heads are not compatible with all engines.

When purchasing cylinder heads, it is important to ensure that the product is compatible with the make and model of your car. Many retailers will list the compatibility of the cylinder head on the product page. If the retailer does not list the compatibility, you can contact the retailer’s customer service department for assistance.

It is also important to ensure that the cylinder heads you purchase are compatible with the year the car was manufactured. Many retailers will list the compatibility of the cylinder head on the product page. If the retailer does not list the compatibility, you can contact the retailer’s customer service department for assistance.

When purchasing cylinder heads, it is important to ensure that the product is compatible with the engine size in your car. Many retailers will list the compatibility of the cylinder head on the product page. If the retailer does not list the compatibility, you can contact the retailer’s customer service department for assistance.

When purchasing cylinder heads, it is important to ensure that the product is compatible with the type of engine in your car. Cylinder heads are not compatible with all engines.

If you are unsure which cylinder heads to purchase, you can contact the retailer’s customer service department for assistance. The customer service department will be able to answer any questions you have about the product and help you determine which cylinder heads are compatible with your car.

What are the different cylinder heads?

A cylinder head is the component of a reciprocating engine that sits above the cylinders and contains the valves.

There are many different types of cylinder heads, each with its own advantages and disadvantages. The most common types are:

Intake manifold – This is the part of the cylinder head that the air/fuel mixture flows into. It is usually made out of cast aluminum and has a number of ports that the intake valves attach to.

Exhaust manifold – This is the part of the cylinder head that the exhaust gases flow out of. It is usually made out of cast aluminum and has a number of ports that the exhaust valves attach to.

Cylinder head gasket – This is a gasket that sits between the cylinder head and the engine block. It seals the two components together and prevents the engine oil and coolant from leaking out.

Intake valves – These are the valves that allow the air/fuel mixture to enter the cylinders. They are made out of stainless steel and are usually actuated by a camshaft.

Exhaust valves – These are the valves that allow the exhaust gases to escape the cylinders. They are made out of stainless steel and are usually actuated by a camshaft.

Valve seats – These are the parts of the cylinder head that the valves sit in. They are usually made out of brass and are precision machined.

Valve guides – These are the parts of the cylinder head that the valve stems ride in. They are usually made out of bronze and are precision machined.

Camshaft – This is the part of the cylinder head that the intake and exhaust valves are actuated by. It is usually made out of cast iron or aluminum and has a number of lobes that the valve springs sit on.

Pistons – These are the parts of the engine that go up and down in the cylinders. They are made out of cast aluminum or forged steel and have a number of rings that seal the combustion chamber.

Connecting rods – These are the parts of the engine that connect the pistons to the crankshaft. They are made out of forged steel and have a bearing at each end that the piston rings ride on.

Crankshaft – This is the part of the engine that the connecting rods are attached to. It is made out of cast iron or forged steel and has a number of lobes that the camshaft rides on.

Are bigger cylinder heads better?

There is a lot of debate surrounding the topic of bigger cylinder heads being better. Some people swear by them, while others think they are a waste of money. So, what is the truth?

The answer to this question depends on a few factors. The first is what type of engine you are using. If you are using a naturally aspirated engine, then bigger cylinder heads are not going to be as beneficial. However, if you are using a forced induction engine, then bigger cylinder heads can provide some serious performance benefits.

The second factor to consider is your build. If you are using a stock block and head, then bigger cylinder heads are not going to provide as many benefits as they would if you were using a built engine. In general, the more custom the build, the more benefits you will see from using bigger cylinder heads.

The bottom line is that bigger cylinder heads can provide some serious performance benefits, but only if you are using a forced induction engine and if you have a custom build. If you are using a stock block and head, then you are likely to see minimal benefits from using bigger cylinder heads.

What are performance cylinder heads?

A performance cylinder head is a specially designed and engineered cylinder head that is used in high performance or racing applications. They are typically made from a higher quality alloy than standard heads and are often CNC machined to provide a more precise fit and finish. They also typically feature larger and more aggressive intake and exhaust ports, as well as enlarged valve seats and ports. This allows for more air and fuel to be inducted and expelled from the engine, resulting in increased power and performance.

Most performance cylinder heads are designed for use with aftermarket camshafts, and are not compatible with the factory camshafts. It is important to ensure that the head you are purchasing is compatible with the camshaft you are using, as well as the rest of the components of your engine.

Performance cylinder heads are available from a variety of different manufacturers, and can be quite expensive. It is important to do your research and compare the features and benefits of different heads before making a purchase.

What heads are best for Chevy 350?

In order to get the most performance out of your Chevy 350 engine, it’s important to select the right heads. There are a variety of different head options available, so it can be tricky to decide which is best for your needs. In this article, we’ll take a look at the different types of heads available and outline some of the pros and cons of each.

The most popular head choice for the Chevy 350 is the cast iron head. Cast iron heads are durable and can provide good performance, especially when combined with a good intake and exhaust system. Another popular choice is the aluminium head. Aluminium heads are lighter than cast iron heads, which can lead to improved performance. However, they can also be more expensive.

Another thing to consider when choosing heads is the port size. The port size refers to the size and shape of the opening in the head that the intake and exhaust gases pass through. Larger ports can provide better airflow, which can lead to improved performance.

So, what are the best heads for Chevy 350? Ultimately, it depends on your needs and budget. If you’re looking for good performance and durability, cast iron heads are a good option. If you’re looking for a lighter option with even better performance, aluminium heads are a good choice. And if you’re looking for the best possible airflow, go for a head with larger ports.

How do I identify my GM heads?

GM has long been a trusted name in the automotive industry, and their engines are some of the most reliable on the market. If you’re the owner of a GM car or truck, then you’re likely to have a GM engine under the hood. It’s important to know how to identify your GM heads, as this will help you to ensure that you’re getting the most out of your engine.

There are a few things that you can look for to identify your GM heads. The first is the logo. GM engines will typically have a large “GM” logo on the front of the heads. The second thing to look for is the casting number. This is a unique number that is assigned to each set of GM heads. You can find the casting number on the side of the heads, near the valve cover.

If you’re still not sure whether or not your heads are GM heads, there is a simple test that you can perform. Remove the valve cover and look at the camshaft. GM heads will have a stamped “GM” logo on the top of the camshaft.

If you’re looking to upgrade your GM engine, it’s important to make sure that you’re getting the right parts. Headers, camshafts, and other performance parts are available for GM engines, and you can find them at most automotive stores. Make sure that you’re getting parts that are designed for your specific engine, and be sure to follow the installation instructions closely.

Upgrading your GM engine can be a great way to improve performance and fuel economy. If you’re not sure where to start, consult with a professional mechanic. They can help you to select the right parts and make sure that the installation is done correctly. With the right upgrades, you can get the most out of your GM engine.

What is an L head?

L-heads are a type of engine block that was used in early automobiles. They are named for their shape, which is in the form of the letter “L”. L-heads are a bit rare today, but they can still be found in some older cars and trucks.

L-heads are a type of overhead valve engine. This means that the valves are located in the head of the engine, rather than the block. This design is less common today, but it was once very popular.

L-heads are distinguished by their unique valve layout. The valves are located in two separate chambers, one on each side of the head. This layout is what gives the engine its “L” shape.

L-heads are not as common today as they once were. However, they remain a popular choice for vintage cars and trucks. If you are looking for an engine that is a bit different from the norm, an L-head may be the perfect option for you.